GeoSCOUT X Data Logger
The GeoSCOUT X data logger is an easy-to-use and reliable tool for collecting geospatial data from Holland Scientific sensors and other sensors that provide RS-232 text-based data streams. Geospatial sensor data are stored on an internal SD flash card. All data is stored in files that are organized with a comma-separated-variable text format for easy import into third-party GIS mapping and analysis software.
The GeoSCOUT X can support 4 Crop Circle sensors plus two additional RS-232 serial devices. Position offsets for each sensor can be readily configured.
Preliminary
SPECIFICATIONS:
SPECIFICATIONS
Internal Memory: SD FLASH (class 4 or higher recommended)
Memory Capacity: 2 to 32 GB
File System: FAT-16 or FAT-32 DOS compatible
Data Transfer: Mini B USB connector, 1.5 Mb/sec transfer rate
Keyboard: 11-key metal dome, tactile
Display: 128 by 64 pixel backlit liquid crystal display
Internal GPS Accuracy: <2.5m CEP50
External GPS Serial Port: 4800, 9600, 19200 or 38400 baud, Odd/Even/No parity, 8 or 9 data bits and 1 or 2 stop bits
Control Serial Port: 4800, 9600, 19200 or 38400 baud, Odd/Even/No parity, 8 or 9 data bits and 1 or 2 stop bits
HS Sensor Serial Port: Communication parameters are selected automatically
AUX1/AUX2 Serial Ports: 4800, 9600, 19200 or 38400 baud, Odd/Even/No parity, 8 or 9 data bits and 1 or 2 stop bitsELECTRICAL / MECHANICAL
Internal Power Source: Lithium ion battery (powers the data logger, not external sensor(s))
Sensor Voltage Output: Short circuit protected, over current limited to 4 Amperes
Input Voltage Range: 10-16VDC, load dump and reverse bias protected
Dimensions: 8.25 in. (21.0 cm) X 5.1 in. (13.0 cm) by 2.0 in. (5.1 cm)
Enclosure: Injection molded, ABS material
Environmental: IP64 for splash and dust resistance.OPTIONAL ACCESSORIES
- Dual GPS/CTRL serial adapter cable
- Dual AUX1/AUX2 serial adapter cable
- Two meter power cable
- USB serial cable, mini type B to type A
- Serial port dust cover caps